伪装遮障材料耐老化性能与机理分析

目的 研究伪装遮障材料在实用期的老化机理,获悉伪装遮障材料失效的主要环境因素。方法 通过分析伪装遮障材料在自然环境和实验室单因素环境中的性能变化,得出影响伪装遮障材料老化失效的主要因素。采用扫描电子显微镜、红外光谱仪、X射线光电子能谱仪表征材料的微观形貌、化学结构和化学成分变化,解释伪装遮障材料的老化机理。结果 获得了在不同自然环境、实验室单因素环境下,伪装遮障材料颜色外观和力学性能的变化规律,得到了伪装遮障材料在老化过程中发生的微观形貌、化学结构和化学成分变化。结论 伪装遮障材料在西双版纳自然环境下的老化程度最大,在济南自然环境下的老化程度最小。光照是导致伪装遮障材料颜色外观及力学性能降低的主要因素。老化过程中,主要是材料表面的聚氨酯发生老化、脱落,导致材料的力学性能下降。伪装遮障材料破坏时,纤维有2种失效形式,一种是纤维脱黏、直接断裂;另一种是纤维脱黏,拔出,或者拔出过程中断裂。     

Lower back pain and its association with whole-body vibration and manual materials handling among commercial drivers in Sabah

A cross-sectional study was undertaken to determine the prevalence of lower back pain (LBP) and its association with whole-body vibration (WBV) and manual materials handling (MMH). We studied 110 commercial vehicle drivers using a self-administered questionnaire and the VI-400Pro human vibration monitor. Prevalence of LBP was 66.4%. The percentage of drivers who had frequent manual handling of heavy loads was 45.5% and those who handled heavy loads in awkward postures accounted for 86.4%. Daily vibration A(8) averaged on the z axis was 0.25 (0.06) m·s^?2 and at vector sum was 0.29 (0.07) m·s^?2. Daily vibration exposures on the z axis, frequent manual handling of heavy loads and awkward posture during MMH were significantly associated with LBP. Drivers who are exposed to WBV and frequently handle heavy loads manually and with awkward postures probably have more LBP than drivers who are exposed to only one of these risk factors.     

空间系绳系统安全性研究综述

系绳技术在空间探测与航天技术领域相较于现有空间技术具有很大优势,随着空间系绳技术的快速发展,其安全性越来越得到关注。首先从理论研究及空间试验两方面对系绳系统安全性的研究现状进行了总结,分析了空间试验的失败原因。其次,详细描述了影响系绳系统安全性的几个因素——空间环境、系绳材料、编制结构、涂层材料及释放机构的设计。最后提出了提升系绳系统安全性的方法,并对系绳系统安全性的研究热点及发展趋势进行了预测。     

难熔金属表面高温防护涂层研究进展与技术展望

回顾了难熔金属五大高温防护涂层体系的发展现状,即生成保护性氧化膜的金属间化合物涂层、贵金属涂层、生成保护性氧化膜的合金涂层、惰性氧化物陶瓷涂层以及玻璃陶瓷基复合涂层,总结了这些涂层的高温防护机理、制备方法以及失效机制。基于单一的传统高温防护涂层体系已经难以满足新一代高比冲姿、轨控火箭发动机以及高超声速飞行器热端部件对高温防护涂层提出的抗超高温氧化性能、优良的抗热震性能、良好的抗热冲刷(烧蚀)性能以及长服役寿命等性能需求的现状,简要介绍了过渡族金属的硼化物、碳化物等几种潜在的新型高温防护涂层材料体系,以及相应的涂层制备方法,这些新型涂层体系的发展有望满足现代宇航工业难熔金属热端部件的高温防护需求。     

陶瓷材料放射性衰变时间及最佳平衡周期研究

简述了有关放射性样品衰变平衡及平衡时间的基本理论,运用碘化钠γ谱仪对衰变时间介于0～27 d区间内的三组陶瓷样品进行放射性比活度测定,采取t检验法分析了同一样品在0d～7d、7d～12d、15 d、21 d等不同衰变时间条件下,放射性核素226Ra、232Th、40K比活度测试结果之间的差异程度,通过实验验证陶瓷样品衰变时间对其放射性测定结果准确性的影响.研究表明,当每组检测结果数据的显著性差异水平为5％,若兼顾科学性和经济性,则陶瓷样品的最佳放射性衰变时间应为至少21 d.     

官地水电站竹子坝料场高边坡的稳定性分析及其影响因数研究

竹子坝料场是官地水电站混凝土浇筑骨料的重要来源之一。结合竹子坝料场的地形地质情况,以及料场开挖后形成的东、南、西三段人工边坡,运用刚体极限平衡的方法进行稳定性分析及其影响因数的研究。     

火灾高温下CFRP加固钢筋混凝土梁温度场分析

综合国外CFRP加固混凝土结构抗火试验相关研究,总结了CFRP的高温热工性能参数。用ANSYS软件对火灾高温下不同情况(无防火保护层和有防火保护层)和不同工况(防火涂料涂抹形式)下CFRP加固后的钢筋混凝土梁进行了温度场数值模拟研究。结果表明,防火涂料厚40 mm时,梁耐火极限可达2.5小时以上,且底面和两侧面全面涂抹防火涂料的防火效果最好。本文研究有助于进一步深入认识CFRP加固钢筋混凝土结构在高温下的力学性能和耐火极限,且对CFRP加固后的结构防火设计具有一定的指导意义。     

Waste materials for activated carbon preparation and its use in aqueous-phase treatment: a review

Commercial activated carbon is a preferred adsorbent for the removal of micropollutants from the aqueous phase; however, its widespread use is restricted due to high associated costs. To decrease treatment costs, attempts have been made to find inexpensive alternative activated carbon (AC) precursors, such as waste materials. Some reviews report the use of waste materials for the preparation of AC; however, these studies are restricted to either type of wastes, preparation procedures, or specific aqueous-phase applications. The present work reviews and evaluates literature dedicated both to the preparation of AC by recycling different types of waste materials and also to its application in various aqueous-phase treatments. It is clear that conventional (from agriculture and wood industry) and non-conventional (from municipal and industrial activities) wastes can be used to prepare AC, that can be applied in various aqueous treatment processes, namely to remove organic pollutants, dyes, volatile organic compounds, and heavy metals. Moreover, high surface areas can be obtained using either physical or chemical activation; however, combined treatments might enhance the surface properties of the adsorbent, therefore increasing its adsorption capacity. It is evident from the revision made that AC prepared from both conventional and non-conventional wastes might effectively compete with the commercial ones. This happens mostly when the activation procedures are optimized considering both the raw material used to produce the carbons and the contaminants to be removed.     

Wood carbon content of tree species in Eastern China: interspecific variability and the importance of the volatile fraction

Data on the mass density and carbon content of tree organs, and in particular stem wood, are essential for accurate assessments of forest carbon sequestration. However most available data, including that for East Asia, has neglected the volatile C fraction. Wood samples were collected and assayed for C content from 14 native tree species in Jilin Province, NE China. C content showed statistically significant variation among species, ranging from 48.4% to 51.0%. The volatile C fraction was non-negligible, averaging 2.2%, and showed high variation among species. As found in prior studies, wood C content was appreciably higher in conifer than hardwood (angiosperm) species (50.8+/-0.1% vs. 49.5+/-0.2%, respectively). Wood carbon density (gC/cm(3)) showed very high inter-specific variation, due mainly to differences in wood specific gravity. Our analyses, in conjunction with recently published data from North America, indicate a global mean value of 47.5+/-0.5% wood C content exclusive of volatile C; the widely used 50% figure corresponds more closely to total wood C inclusive of the volatile fraction. Failure to include volatile C or to use species- or higher-taxon-specific C content values in forest C assessments is likely to introduce biases on the order approximately 4-6%. In addition, the stocks and flows of the volatile C fraction in wood are in themselves an important and sorely neglected aspect of forest C processes likely to be strongly impacted by harvests and other management practices.     

Evaluating the efficacy of wood shreds for mitigating erosion

An erosion control product made by shredding on-site woody materials was evaluated for mitigating erosion through a series of rainfall simulations. Tests were conducted on bare soil and soil with 30, 50, and 70% cover on a coarse and a fine-grained soil. Results indicated that the wood product known as wood shreds reduced runoff and soil loss from both soil types. Erosion mitigation ranged from 60 to nearly 100% depending on the soil type and amount of concentrated flow and wood shred cover. Wood shreds appear to be a viable alternative to agricultural straw. A wood shred cover of 50% appears optimal, but the appropriate coverage rate will depend on the amount of expected concentrated flow and soil type.